Skip to content
Premier 2 Way Ramp - Polished Brass

Premier 2 Way Ramp - Polished Brass

£30.99
£27.39 - £95.39
£30.99
£26.99
£26.99 - £81.49
£26.99

Fastest Available Option*

The door bar that solves a threshold height difference issue (2mm-9mm step)

2 Way Door Ramp for ceramic tiles, wood, laminate, non porous stone

  • This 2 Way Ramp threshold is a quality flooring trim to manage a threshold height difference between floors from 2mm to 9mm.
  • Suitable for flooring which has a hard, smooth, sealed surface e.g. ceramic tiles, many laminates & engineered woods, stone (providing it is sealed).
  • Self-adhesive strip on underside of both sections strongly sticks the 2 Way Door Ramp to the higher floor.
  • No screws and therefore ideal where underfloor heating could be an issue
  • Suitable for floating and non-floating hard floorcoverings i.e. those that expand and contract and those which are stuck down and static.
  • Made in a choice of 10 smart, unlacquered metal finishes.
  • Available 900mm, 1000mm, 1800mm and 2700mm.
  • If you have a 10mm-20mm height difference, please take a look at the Premier Door Ramps instead.
  • The Premier Posh and Premier Cover door threshold plates are also suitable for joining two different levels of floor (any type of floorcovering, including carpeted floors) up to around 8mm difference.
Tip: to precisely measure the height difference from one hard floor to another, use a straight, solid object such as an edge of a book or garden cane, and place vertically against the height difference; mark off the higher level and then measure this dimension with a ruler.

Size options

  • 2-3mm Premier 2 Way Ramp: total width of top & slope: approx. 26mm
  • 4-5mm Premier 2 Way Ramp: total width of top & slope: approx. 29mm
  • 6-7mm Premier 2 Way Ramp: total width of top & slope: approx. 35mm
  • 8-9mm Premier 2 Way Ramp: total width of top & slope: approx. 43mm

Fitting tips for 2 Way Ramps to transition across your threshold height difference

  • Cut to length with a sharp hack-saw.
  • Make sure the floorcovering is clean, degreased and dry before sticking down the 2 Way Door Ramp.
  • Only peel off the protection to the adhesive strip which will stick to the horizontal, higher floor. Do not peel off the other adhesive strip.
  • Make sure you fit it the correct way around, as this will determine the height difference achieved.
  • For information about how much your floor may expand, please refer to the manufacturer of the flooring.
Measure the height of your step before choosing the correct size

Co-ordinating door bars and flooring trims in this range

We sell a choice of 4 brands of door thresholds and floor trims: Premier, Feline, Ali and AL. Each brand has its own selection of unique styles and finishes. We therefore recommend you choose from the same range if you wish them to complement each other. You can do a search by selecting the relevant range name from the list of options shown under ""TYPE"" (left of web page).

Looking after & cleaning door ramps

This product is made of solid brass and hand-finished and therefore the finish may vary slightly from batch to batch. To achieve an authentic look and withstand daily use, they are unlacquered and therefore may age naturally over time, depending on their environment. Please see our How to Guide: Cleaning Door Thresholds
Finish Antique Brass, Antique Bronze, Black, Brushed Chrome, Chrome, Pewter, Polished Brass, Polished Nickel, Satin Brass, Satin Nickel
Height Difference 2-3mm, 4-5mm, 6-7mm, 8-9mm
Length 90, 100, 180 & 270cm
Size 9
Range Premier Range
Threshold Width 2-3, 4-5, 6-7, 8-9mm
Supplier g